Bill works to release a 0.75 cam from an 0.75 crack. It took about a half-hour of struggling with it, but after a while I got it to wiggle a little bit, and that gave me the idea to keep working it until the soft aluminum of the cam teeth could be "filed" down by the hard rock, enough to release the cam. Better than abandoning a $70 piece of hardware!
Title
Bill works to release a 0.75 cam from an 0.75 crack.
Exposure
125, ¹⁄₂₀₀ sec at f/5.6
Focal Length
74 mm
Camera and Lens
SONY DSC-RX100 28-100mm F1.8-4.9
Datetime
Image captured on September 27, 2025 at 3:02:24 PM.
