Galleries
Broken Bike Parts
One end of rim wall failure.
Album
Previous
Next
One end of rim wall failure. The base of the rim wall is just over 1mm thick. The wall is thickest at the bead, then tapers at the base. It's not obvious that this failure started at this end, even though the metal at the outside edge of the bead is slightly discolored. It's not a natural weak spot.
Title
One end of rim wall failure.
Exposure
200, ¹⁄₂₀₀ sec at f/2.8
Camera and Lens
FUJIFILM FinePix F10
Datetime
Image captured on October 24, 2009 at 10:25:49.
Galleries
About
Contact
Search
MrBill's Albums
Galleries
About
Contact
Search